Panch Bhai Engineering

Tower Winch Machine 15 C.F.T Capacity

SPECIFICATION of Tower Winch Machine 15 C.F.T Capacity

1. TOWER WINCH MACHINE'S CHASSIS 8'X4' AND 4X4 SQUARE SHATISH (TOTAL=25")

2. TOWER WINCH MACHINE'S PINION 2 NOS, 1 NO. 26"/28" AND 1N0.6"/7"

3. WINCH MACHINE'S ROOF DRUM 10.5" DIA, & 17" LONG, 1 NOS

4. CLUTCH CONE 1 NO. 22" DIA 5" LONG.

5. WINCH MACHINES BEARING #3 11.4 NOS

6. BRASS METAL BUSH 4 NOS

7. THRUST BEARINGS 3 NOS. 5" DIA

8. LINE SHAFT BUSH 4 NOS.

9. MOTOR FITTING'S CHASSIS 2 NOS., 50" LONG

10. WINCH MACHINE'S BELT PULLEY 2 NOS. (1 NO.20" AND 1 NO.5" DIA)

11. V-BELT 3 NOS.110"

12. WINCH MACHINES SHAFT 2 NOS. (1 NO.3" DIA AND 1 NO. 2*2/3 "DIA)

1. BUCKET SIZE 26"x20"x58 SQUARE AND MOUTH OF THE HOLE 14"

2. BUCKET PLATE 14 GUAGE SHEET, SUPPORT BY 1.5X15 FLAT BAR

3. BUCKET SIDE PLATE 12.5mm THICK 25"X4" LONG

4. BUCKET BEARING 6307, 8 NOS.

5. BEARING STICK 4 NOS.

6. BUCKET ROLLER 4 NOS. (6" DIA)

7. BUCKET ZIPPER 2 NOS. AND PIN 1 PC

1. WINCH MACHINE'S MOTOR 1 NO. (440 V & 30 HP. CHINA)

2. MOTOR ON/OFF SWITCH 1 PC

3. WIRE ROOF 5/6MM THICK 350 FEET LONG

4. BOTTOM PULLEY 1PC,TOP PULLEY 1 PC. (PULLEY DIA 12") 2 NOS

5. BOTTOM PULLEY AND TOP PULLY BEARING 6307, 4 PC

6. UPPER PLATE 28"X28" SQUARE 1 PC

1. TOWER FOUNDATION PLATE 28"X28" SQUARE 20mmTHICK PLATE

2. FOUNDATION BOLT 4 NOS., LONG 10"

TOWER

1. TOWER CHANNEL 4"X2" LONG 10 FEET 2 PC

2. TOWER ANGEL 2"x2" LONG 10 FEET 2 PC

3. TOWER ANGEL 2"X2" FOR SIDE FRAME 16 FEET

4. TOWER ANGEL 1.5"x1.5" CROSS FRAME 45 FEET